Fisher
Indicator
Fisher Transform maps the last 9 median prices into a Fisher line and a trigger. Records 0 through 7 are empty. The first Fisher value is on record 8.
John F. Ehlers, Using The Fisher Transform, Technical Analysis of Stocks & Commodities, November 2002. Reviewed by the ChartLabs team, updated Nov 2026.
Fisher is above Trigger (3.16).
Fisher 3.16 · Trigger 3.06
Fisher is above Trigger (3.16).
Fisher 3.16 · Trigger 3.06
Illustration on simulated data.
Fisher TransformWhat is the Fisher indicator?
Length is 9, from 1 to 500. There is no source input. The price is the median, (high + low) / 2. Fisher is #2962FF and the trigger is #FF6D00, both 1 px, in their own panel, 2 decimals. Guides at 1.5, 0 and -1.5 are #E91E63. Guides at 0.75 and -0.75 are #787B86. All five are dashed.
Closes 1 through 9, then 8, 7, 6, with high and low equal to the close so the median is the close. Records 0 through 7 are empty. Record 8 is Fisher 0.3428. Record 9 is 0.6647, record 10 is 0.7753, record 11 is 0.6037. The trigger is the previous Fisher, so it starts on record 9 at 0.3428.
The value is clamped inside -0.999 to 0.999 before the log, and that clamped value is what the next bar continues from. A flat window, where the highest median equals the lowest, leaves the bar empty and the recursion restarts. An older card for this name used length 14. This one uses 9.
Median, not close
You cannot switch the source. Ehlers used the median price of the bar.
Trigger lags by one
The trigger on this bar is the Fisher value of the bar before. It is empty on the first Fisher bar.
Fisher signalsFour patterns to know.
Fisher rising off the first print
0.3428, then 0.6647, then 0.7753. The line is above its trigger on those bars.
Fisher turning down
Record 11 is 0.6037, under the 0.7753 before it. The trigger is still the older, higher Fisher.
A flat median window
When the highest median equals the lowest, that bar is empty and the next bar starts the recursion again from zero.
Through the zero guide
The zero line is #E91E63, dashed. Crossing it means the smoothed median left the middle of its own window.
Fisher formulaHow it is calculated.
Wait for 9 medians
Records 0 through 7 are empty at the default length. The first Fisher is record 8.
Scale the window and clamp
The median is placed between the highest and lowest median of the length, smoothed with 0.33 and 0.67, then held inside -0.999 to 0.999.
Take the log, then lag it
Fisher adds half the previous Fisher. The example runs 0.3428, 0.6647, 0.7753, 0.6037. The trigger prints the prior Fisher, first at 0.3428 on record 9.
Fisher settingsEvery setting, explained.
| Setting | Default | Range | What it changes |
|---|---|---|---|
| Length | 9 | 1 to 500 | Medians in the window. The first Fisher is on record length minus 1. |
| Fisher line | #2962FF | Fixed | The transform, 1 px. |
| Trigger line | #FF6D00 | Fixed | The previous Fisher, 1 px. |
| Guides 1.5, 0, -1.5 | #E91E63 | Fixed | Dashed, 1 px. |
| Guides 0.75, -0.75 | #787B86 | Fixed | Dashed, 1 px. |
- Setting
- Length
- Default
- 9
- Range
- 1 to 500
- What it changes
- Medians in the window. The first Fisher is on record length minus 1.
- Setting
- Fisher line
- Default
- #2962FF
- Range
- Fixed
- What it changes
- The transform, 1 px.
- Setting
- Trigger line
- Default
- #FF6D00
- Range
- Fixed
- What it changes
- The previous Fisher, 1 px.
- Setting
- Guides 1.5, 0, -1.5
- Default
- #E91E63
- Range
- Fixed
- What it changes
- Dashed, 1 px.
- Setting
- Guides 0.75, -0.75
- Default
- #787B86
- Range
- Fixed
- What it changes
- Dashed, 1 px.
Drag to see how the setting changes the lines and how many signals you get. Illustration on simulated data.
Fisher strategiesUse it in 3 setups.
Read the first four prints
Then 0.6647, 0.7753 and 0.6037. The panel rounds to 2 decimals, so those show as 0.34, 0.66, 0.78 and 0.60.
Ignore the empty left edge
Length 9 has no window yet. Empty is not a reading of zero.
Use the trigger as a lag
That is record 8 Fisher, not a new calculation. A cross of the two lines is the transform crossing its own previous value.
Fisher mistakesCommon mistakes.
Using length 14
An older card defaulted to 14, with different colours. This page is length 9, #2962FF and #FF6D00, 2 decimals.
Reading a flat window as zero
A window whose medians are equal is empty, and the recursion restarts. It is not a print of 0.0000.
Feeding it a close by habit
The input is the median. On the example the high and low equal the close, so the median happens to be the close. On a normal bar it is not.
Fisher combinationsPair it with these.
Fisher FAQQuestions traders ask.
What is the Fisher Transform length?
9, from 1 to 500. There is no source. The series is the median of high and low.
What is the worked series?
Medians 1 through 9, then 8, 7, 6. Fisher is empty through record 7, then 0.3428, 0.6647, 0.7753, 0.6037. The trigger starts on record 9 at 0.3428.
What do the guides use?
1.5, 0 and -1.5 are #E91E63. 0.75 and -0.75 are #787B86. Dashed, 1 px. The panel is 2 decimals.
What is the trigger?
The Fisher value of the previous bar. It is empty until one Fisher value exists.
What if the window is flat?
The bar is empty and the recursion restarts from zero on the next bar.
Why not length 14?
Ehlers and the TradingView Fisher Transform use 9. Length 14 was a different card.
Does it repaint?
No. A closed bar stays. The live bar moves until it closes.
Who published it?
John F. Ehlers, Using The Fisher Transform, Technical Analysis of Stocks & Commodities, November 2002.
Related indicatorsMore momentum tools.
All momentum indicatorsTry Fisher on a live chart.
Free. No download.
Works in your browser and on iPhone too.