Relative Spread Strength

RSS
Indicator

MomentumSeparate panelFree on ChartLabs

Relative Spread Strength runs a 4-bar RSI on the gap between a fast and a slow average of the close, then averages that RSI over 5 bars.

Ian Copsey, Integrated Technical Analysis (Wiley, 1999). The RSI inside it follows J. Welles Wilder Jr. (1978). This kernel uses an RSI length of 4, not Copsey's 5. Reviewed by the ChartLabs team, updated Nov 2026.

Example market1hIndicatorsAtlas AIRSSchartlabs.co/charts
Atlas reads it

RSS is 0.000.

RSS 0.000

Atlas reads it

RSS is 0.000.

RSS 0.000

Illustration on simulated data.

Relative Spread StrengthWhat is the RSS indicator?

Fast EMA is 10 and Slow EMA is 40, each from 1 to 5,000. The close is fixed. There is no source input. The RSI length is 4 and the final average is 5, and neither is a setting. The line is #999999, 1 px, in its own panel, 3 decimals.

Both averages seed with the first close. On a steady rise, closes 1 through 8, records 0, 1 and 2 are empty. Then the line prints 25.0000, 40.0000, 60.0000, 80.0000 and 100.0000. The early RSI placeholders are 0 and still sit inside the 5-bar average, which is why record 3 is 25 rather than 100. The panel shows 25.000, 40.000, 60.000, 80.000 and 100.000.

Copsey published an RSI length of 5. This chart uses 4, which is what the historical rows were built with. Records 0 to 2 are empty here. An older row printed 0 in those places, and those zeros are exactly the placeholders that still feed the average.

Why 25

Three placeholder zeros plus an RSI of 100, divided by 4, is 25. The next bar drops one zero and the average becomes 40.

The averages

EMA weights are 2/(10+1) and 2/(40+1), seeded with the first close, not with a simple average of the window.

RSS signalsFour patterns to know.

1Bullish lean

A steady rise

The spread's RSI goes to 100, and RSS climbs 25.0000, 40.0000, 60.0000, 80.0000, 100.0000 as the placeholder zeros leave the average.

2Bearish lean

A steady fall

A one-way drop pushes the inner RSI the other way. The same placeholder zeros still shape the first few prints.

3Inconclusive

Empty head

Records 0, 1 and 2 are empty. They are not a reading of 25 and they are not a printed 0.

4Inconclusive

Placeholders still count

Even though those bars are empty on the line, their placeholder zeros stay inside the 5-bar average until they age out.

RSS formulaHow it is calculated.

RSS=SMA(RSI(fast−slow))
STEP 1

Build the spread

EMA 10 of the close minus EMA 40 of the close, both seeded with the first close.

STEP 2

Take a 4-bar RSI

Wilder averages start at 0. Records 0 to 2 contribute a placeholder 0 and the line stays empty.

STEP 3

Average five of those

On closes 1 through 8 the prints from record 3 are 25.0000, 40.0000, 60.0000, 80.0000 and 100.0000.

RSS settingsEvery setting, explained.

SettingDefaultRangeWhat it changes
Fast EMA101 to 5,000The shorter average of the close.
Slow EMA401 to 5,000The longer average of the close.
RSI length4FixedInside the study. Copsey published 5. This kernel uses 4.
Smooth5FixedThe simple average of the RSI. Not an input.
Line#999999FixedOne line, 1 px, 3 decimals.
Setting
Fast EMA
Default
10
Range
1 to 5,000
What it changes
The shorter average of the close.
Setting
Slow EMA
Default
40
Range
1 to 5,000
What it changes
The longer average of the close.
Setting
RSI length
Default
4
Range
Fixed
What it changes
Inside the study. Copsey published 5. This kernel uses 4.
Setting
Smooth
Default
5
Range
Fixed
What it changes
The simple average of the RSI. Not an input.
Setting
Line
Default
#999999
Range
Fixed
What it changes
One line, 1 px, 3 decimals.
107 bars in the fast average
70,20866,82563,44360,06164,803.7

Drag to see how the setting changes the lines and how many signals you get. Illustration on simulated data.

RSS strategiesUse it in 3 setups.

Read the climb off 25

Record3is25.0000

On a one-way rise the inner RSI is 100, and 25.0000 is that 100 diluted by three placeholder zeros. Traders often wait until those zeros have left before treating the level as the live RSI.

Leave the first three bars

Records0 to 2are empty

The average is already using their zeros, but the line does not draw them as 0.

Remember the length is 4

Not5as in the book

A 5-bar RSI would not print this table. The kernel's table is the one above.

Test a rule in the Strategy TesterFree with 1 year of history. Past results do not guarantee future results.

RSS mistakesCommon mistakes.

Setting the RSI length to 5

You cannot. It is fixed at 4. The book's 5 is not this chart.

Calling record 3 a full 100

The RSI is 100 and RSS is 25.0000, because of the placeholder zeros.

Treating the empty head as printed zeros

The line is empty. The zeros exist only inside the average. An older row drew them.

RSS combinationsPair it with these.

RSS FAQQuestions traders ask.

What are the RSS settings?

Fast EMA 10 and Slow EMA 40, each from 1 to 5,000. RSI length 4 and smooth 5 are fixed. The line is #999999.

What is the worked series?

Closes 1 through 8. From record 3 the line is 25.0000, 40.0000, 60.0000, 80.0000 and 100.0000.

Why does it start at 25?

Three placeholder zeros and one RSI of 100 average to 25. The line itself is empty on records 0, 1 and 2.

Why RSI length 4?

That is the length the historical rows used. Copsey published 5. It is not a setting.

Is the close selectable?

No. Both averages read the close.

How are the EMAs seeded?

With the first close, then the usual EMA step. Not with a simple average of the first window.

Does RSS repaint?

No. A closed bar stays. The live bar moves until it closes. A non-numeric close leaves the state alone and that bar empty.

Who published it?

Ian Copsey, Integrated Technical Analysis (Wiley, 1999), with Wilder's RSI (1978).

Related indicatorsMore momentum tools.

All momentum indicators

Try RSS on a live chart.
Free. No download.

Works in your browser and on iPhone too.

Example market1h
RSS