SMI
Indicator
The Stochastic Momentum Index measures where the close sits inside the recent high-low range, smoothed twice, on a scale that runs past -100 and 100.
Created by William Blau, 1993. Reviewed by the ChartLabs team, updated Nov 2026.
SMI is under its signal line.
SMI -84.8
SMI is under its signal line.
SMI -84.8
Illustration on simulated data.
Stochastic Momentum IndexWhat is the SMI indicator?
SMI draws two lines in their own panel. SMI is blue (#2962FF) and the signal, labelled SMI-based EMA, is orange (#FF9800). Dashed levels sit at 40 and -40 in grey (#808080), with a zero line and a band between -40 and 40. The defaults are %K length 10, %D length 3 and EMA length 3.
Take the midpoint of the highest high and the lowest low over 10 bars. The close's distance from that midpoint, and the high-low range itself, are each smoothed twice with a 3-bar EMA. SMI is 200 times the smoothed distance divided by the smoothed range. The signal is a 3-bar EMA of SMI. The EMAs start from a simple average, and the windows are full, so the first SMI is on record 13 and the signal on record 15. A smoothed range of zero leaves the bar blank.
The chart also keeps a hidden zero plot, coloured #787B86, used for the fills beyond 40 and -40. The page pictures draw the two lines, the dashed 40 and -40, a zero line and the band. They are not a copy of those hidden fills.
Past 100
Because the close is measured from the middle of the range, not from the low, two smoothings can push SMI beyond -100 and 100.
%D is the inner smooth
The %D length is the EMA applied twice to the distance and twice to the range. It is not a stochastic %D line. The line traders call the signal is the separate EMA length.
SMI signalsFive patterns to know.
SMI crosses above its signal
The smoothed distance from the range midpoint has turned up through its EMA.
SMI crosses under its signal
SMI has turned down through the signal.
SMI above 40
The close is in the upper part of the recent range, after two smoothings. A trend can hold it above 40.
SMI below -40
The close is in the lower part of the range.
Cross of zero
The close has moved through the midpoint of the recent high-low range, on this smoothed measure.
SMI formulaHow it is calculated.
Distance from the middle
Over the last 10 bars, find the highest high and the lowest low. Measure the close from their midpoint, and measure the range itself.
Smooth both twice
Run a 3-bar EMA, seeded with a simple average, on each series, then the same EMA again. Divide 200 times the smoothed distance by the smoothed range.
Add the signal
A further 3-bar EMA of SMI is the signal line. SMI starts on record 13 and the signal on record 15.
SMI settingsEvery setting, explained.
| Setting | Default | Range | What it changes |
|---|---|---|---|
| %K Length | 10 | 1 to 5,000 | Bars in the highest high and lowest low. The Signal lens on this page changes this. |
| %D Length | 3 | 1 to 5,000 | The EMA length applied twice to the distance and twice to the range. |
| EMA Length | 3 | 1 to 5,000 | The EMA of SMI that draws the signal. |
| Lines | SMI #2962FF, signal #FF9800, zero plot #787B86 | Fixed | The zero plot is hidden on the chart and used for the outer fills. |
| Levels | 40 and -40 #808080, zero rgba(120, 123, 134, 0.5), band rgba(41, 98, 255, 0.1) | Fixed | Dashed 40 and -40, a zero line, and a band between them. |
- Setting
- %K Length
- Default
- 10
- Range
- 1 to 5,000
- What it changes
- Bars in the highest high and lowest low. The Signal lens on this page changes this.
- Setting
- %D Length
- Default
- 3
- Range
- 1 to 5,000
- What it changes
- The EMA length applied twice to the distance and twice to the range.
- Setting
- EMA Length
- Default
- 3
- Range
- 1 to 5,000
- What it changes
- The EMA of SMI that draws the signal.
- Setting
- Lines
- Default
- SMI #2962FF, signal #FF9800, zero plot #787B86
- Range
- Fixed
- What it changes
- The zero plot is hidden on the chart and used for the outer fills.
- Setting
- Levels
- Default
- 40 and -40 #808080, zero rgba(120, 123, 134, 0.5), band rgba(41, 98, 255, 0.1)
- Range
- Fixed
- What it changes
- Dashed 40 and -40, a zero line, and a band between them.
Drag to see how the setting changes the lines and how many signals you get. Illustration on simulated data.
SMI strategiesUse it in 3 setups.
Signal cross
The usual trigger. Traders often take crosses that start from under -40 only when a trend tool agrees.
Cross up from under -40
The close was in the lower part of the range and the smooth has turned. It can turn back on the next bar.
Zero as the side of the midpoint
Above zero, the smoothed close is above the midpoint of the recent range.
SMI mistakesCommon mistakes.
Fading 40 like a hard ceiling
40 is a guide Blau's readers used, not a wall. SMI can stay above it in a trend, and it can go past 100.
Expecting a reading in the first 10 bars
Full windows and two seeded EMAs mean the first SMI is on record 13. Earlier bars are blank.
Trading every cross around zero
Near zero the signal, a 3-bar EMA, crosses on small moves around the range midpoint.
SMI combinationsPair it with these.
SMI + Stochastic
A 0 to 100 stochastic next to SMI, which is centred on the midpoint and can leave -100 to 100.
SMI + RSI
RSI adds a momentum read that does not use the high-low midpoint.
SMI + EMA 200
Direction from the EMA, crosses from SMI.
SMI + KDJ
Another three-line stochastic, if you want to see the same window smoothed a different way.
SMI FAQQuestions traders ask.
What are the default SMI settings?
%K length 10, %D length 3, EMA length 3. There is no source input. The range uses high and low, and the distance uses the close.
Why can SMI go beyond 100?
The close is measured from the middle of the range, then smoothed twice. The result is not capped at the high or the low.
What is the signal line?
A 3-bar EMA of SMI. On the chart its name is SMI-based EMA.
When do the lines start?
SMI on record 13, the signal on record 15, with the defaults. The 10-bar window and the two 3-bar EMAs all have to fill.
What do 40 and -40 mean?
Guide lines. Above 40 the smoothed close is in the upper part of the range. Below -40 it is in the lower part. They are not automatic entries.
What if the range smooths to zero?
The formula would divide by zero, so that bar is blank.
Does SMI repaint?
No. Closed bars keep their values. The live bar moves until it closes.
Is SMI leading or lagging?
Lagging. It smooths the close's place in a window that has already formed.
Who created SMI?
William Blau, Technical Analysis of Stocks & Commodities, January 1993.
Related indicatorsMore momentum tools.
All momentum indicatorsTry SMI on a live chart.
Free. No download.
Works in your browser and on iPhone too.