Keltner Channel (KC)

Keltner Channel
Indicator

VolatilityOn the price chartFree on ChartLabs

Keltner Channels draw bands two ATRs either side of a 20-bar EMA. They show the trend and how far price has stretched from it, in units of volatility.

Introduced by Chester Keltner in 1960, in its modern ATR form. Reviewed by the ChartLabs team, updated Nov 2026.

Example market1hIndicatorsAtlas AIKeltner Channelchartlabs.co/charts
Atlas reads it

Price is inside the channel, above the 20 EMA middle line.

Upper 64,962 · Basis 64,073 · Lower 63,185

Atlas reads it

Price is inside the channel, above the 20 EMA middle line.

Upper 64,962 · Basis 64,073 · Lower 63,185

Illustration on simulated data.

Keltner Channel (KC)What is the Keltner Channel indicator?

The Keltner Channel draws three blue lines on the price chart: a middle line that is a 20-bar exponential moving average of the close, an upper band and a lower band, with a light blue fill between them.

The bands sit 2 times the Average True Range above and below the middle line. ATR is measured over 10 bars with Wilder's smoothing, so the channel widens when bars get bigger and narrows when they shrink.

A close above the upper band means price has moved more than two ATRs above its average, which usually happens in a strong push. In a range, price tends to swing between the bands around a flat middle line. In a trend, it can hold outside one band for many bars.

The original version

Chester Keltner's 1960 channel used a 10-day average of the typical price and the average daily range. The EMA and ATR form used today was popularised by Linda Bradford Raschke.

The squeeze

When Bollinger Bands move inside the Keltner Channel, volatility of closes has dropped below the bars' average range. Many traders call that a squeeze.

Keltner Channel signalsFive patterns to know.

1Bullish

Riding the upper band

Closes keep landing above or near the upper band while the middle line rises. The trend is strong.

2Bearish

Riding the lower band

Closes stay near or under the lower band while the middle line falls. Sellers are in control.

3Bullish lean

Pullback to the middle line

In an uptrend, price dips to the EMA and closes back above it. Buyers are still defending the trend.

4Inconclusive

Inside a flat channel

Closes stay between the bands and the middle line goes sideways. There is no trend to follow.

5Inconclusive

First close outside after a quiet spell

After many bars inside the channel, a close lands beyond a band. Volatility is returning; the side of the break gives the direction.

Keltner Channel formulaHow it is calculated.

Middle=EMA20(close)ATR=RMA10(TR)Upper=Middle+2×ATRLower=Middle−2×ATR
STEP 1

Average the closes

Take a 20-bar EMA of the close, seeded with a plain 20-bar average. That is the middle line.

STEP 2

Measure the bar size

Work out each bar's true range and smooth it over 10 bars with Wilder's RMA. That is the ATR.

STEP 3

Add and subtract

Add 2 ATRs to the middle line for the upper band and subtract 2 ATRs for the lower band.

Keltner Channel settingsEvery setting, explained.

SettingDefaultRangeWhat it changes
Length201 to 5,000 (typical 10 to 50)How many bars the middle EMA covers. Shorter follows price more closely.
Multiplier20 to 50, step 0.1How many ATRs the bands sit from the middle line. 1.5 gives a tighter channel, 2.5 or 3 a wider one.
ATR length101 to 5,000How many bars the ATR smooths. Longer gives steadier band widths.
Basis and bandsEMA basis, ATR bandsFixedChartLabs uses the EMA and ATR form, as TradingView does by default. SMA basis and range bands are not offered.
Lines and fillUpper, basis and lower blue #2962FF, 1 px; fill light blue at 5%Any colour and widthThe look of each line and the fill between the bands.
Setting
Length
Default
20
Range
1 to 5,000 (typical 10 to 50)
What it changes
How many bars the middle EMA covers. Shorter follows price more closely.
Setting
Multiplier
Default
2
Range
0 to 50, step 0.1
What it changes
How many ATRs the bands sit from the middle line. 1.5 gives a tighter channel, 2.5 or 3 a wider one.
Setting
ATR length
Default
10
Range
1 to 5,000
What it changes
How many bars the ATR smooths. Longer gives steadier band widths.
Setting
Basis and bands
Default
EMA basis, ATR bands
Range
Fixed
What it changes
ChartLabs uses the EMA and ATR form, as TradingView does by default. SMA basis and range bands are not offered.
Setting
Lines and fill
Default
Upper, basis and lower blue #2962FF, 1 px; fill light blue at 5%
Range
Any colour and width
What it changes
The look of each line and the fill between the bands.
207 closes outside the channel
70,20566,82063,43460,04864,803.7

Drag to see how the setting changes the lines and how many signals you get. Illustration on simulated data.

Keltner Channel strategiesUse it in 3 setups.

First close outside the channel

Ifprice has stayed inside for 15 barsandcloses beyond a bandthenfollow that side

A close outside after a quiet stretch shows volatility returning. Traders often want the next bar to hold outside too.

Pullback to the middle line

WhileEMA 20is risingifprice dips to it and closes above

In an uptrend the middle line is a common area for pullbacks to stall. Many traders want the close back above it before acting.

Bollinger Bands inside Keltner

Bollinger inside Keltner

IfBollinger Bandsmove insideKeltnerthenwait for the release

The dashed red and green Bollinger Bands are drawn here for illustration. When they move back outside the channel, the quiet spell is ending; price shows which way.

Test a rule in the Strategy TesterFree with 1 year of history. Past results do not guarantee future results.

Keltner Channel mistakesCommon mistakes.

Selling every close above the upper band

In a strong trend price can close outside the upper band again and again. A close there shows a strong push, not a top.

Buying every close under the lower band

The lower band keeps falling in a sell-off. Buying each touch can mean buying all the way down.

Bollinger Bands inside Keltner

Guessing which way the squeeze breaks

A squeeze says a larger move may be coming, not its direction. Here it ended with a drop.

Keltner Channel combinationsPair it with these.

Keltner Channel FAQQuestions traders ask.

What are the default Keltner Channel settings?

Length 20, Multiplier 2 and ATR length 10, with an EMA middle line and ATR bands. These are TradingView's defaults.

What is the difference between Keltner Channels and Bollinger Bands?

Keltner bands are a multiple of ATR, the average bar size. Bollinger Bands use the standard deviation of closes. Bollinger reacts more sharply to big closes; Keltner moves more smoothly.

What is a Keltner squeeze?

When Bollinger Bands move inside the Keltner Channel. Closes have become unusually tight compared with the bars' range. Many traders watch for a larger move once the bands move back out.

What does a close above the upper Keltner band mean?

Price closed more than 2 ATRs above its 20 EMA. In a trend it shows strength; in a range it is a stretch that often fades.

Which multiplier should I use?

2 is the default. 1.5 gives a tighter channel that price leaves more often; 2.5 or 3 keeps only the bigger moves.

Why does ChartLabs use 10 for the ATR?

It matches TradingView's default. The middle line uses 20 bars and the ATR 10, so the bands react to a change in volatility a little faster than the middle line moves.

Do Keltner Channels work on crypto?

Yes. ATR adapts to each market's volatility, so the same settings fit a fast coin and a slower stock.

Is the Keltner Channel leading or lagging?

Lagging. It is built from an EMA and an ATR of past bars. It shows where price sits against recent volatility, not where it goes next.

Does the Keltner Channel repaint?

No. Values on closed bars never change. The live bar moves until it closes.

Who created the Keltner Channel?

Chester Keltner described the first version in How to Make Money in Commodities in 1960. The ATR form is the one most platforms use today.

Related indicatorsMore volatility tools.

All volatility indicators

Try Keltner Channel on a live chart.
Free. No download.

Works in your browser and on iPhone too.

Example market1h
KC (20, 2, EMA, ATR 10)