Squeeze Momentum

Squeeze Momentum
Indicator

MomentumSeparate panelFree on ChartLabs

Squeeze Momentum marks a squeeze when Bollinger Bands sit inside a Keltner channel, and draws a histogram of how far price has moved from its recent average.

Squeeze by John F. Carter, 2005. Histogram form from 2014. Reviewed by the ChartLabs team, updated Nov 2026.

Example market1hIndicatorsAtlas AISqueeze Momentumchartlabs.co/charts
Example market, 1h0.0001268,86565,84662,82759,80964,803.7
Atlas reads it

Bollinger Bands are outside the Keltner channel. The squeeze is off.

Mom 411.1

Atlas reads it

Bollinger Bands are outside the Keltner channel. The squeeze is off.

Mom 411.1

Illustration on simulated data.

Squeeze MomentumWhat is the Squeeze Momentum indicator?

Squeeze Momentum draws a histogram in its own panel, and dots on the zero line. The dots are the squeeze: red (#ef5350) while the Bollinger Bands sit inside the Keltner channel, green (#26a69a) when they do not. The pictures on this page show the histogram. On a chart the dots are there too.

The defaults are length 20, Bollinger multiplier 2 and Keltner multiplier x10 of 15. The engine divides that 15 by 10, so the Keltner channel is 1.5 times the 20-bar ATR. Bollinger uses a population standard deviation. Both channels share the 20-bar average of the close.

The histogram is 0 on the first bar. Until 20 bars exist it is the close minus the midpoint of two centres: the average of the highest high and lowest low, and the average of the close. From bar 20 on it is the end of a straight-line fit through the last 20 of those values. Columns are dark teal (#00897b) while positive and rising, pale teal (#26a69a) while positive and not rising, dark red (#c62828) while falling at or below zero, and pale red (#ef5350) otherwise. A missing previous column counts as zero.

x10 on the Keltner input

15 does not mean 15 ATR. The engine uses 15 / 10, so 1.5 ATR. A setting of 20 would be 2 ATR.

Dots versus columns

The squeeze is the dots. The columns are momentum. A red dot can sit on a green column, and the other way around.

Squeeze Momentum signalsFive patterns to know.

1Inconclusive

Squeeze on

The Bollinger Bands are inside the Keltner channel. The recent range is tight relative to ATR.

2Inconclusive

Squeeze releases

The bands have moved back outside the channel. The tight range has opened. Direction comes from the columns, not from the dot.

3Bullish lean

Rising column above zero

The fitted momentum is above zero and higher than the bar before.

4Bearish lean

Column below zero

Momentum is under zero. Dark red means it is still falling.

5Inconclusive

Release after a squeeze

The dot has just turned off. Traders often look at the column colour for the side, then wait for the next bar.

Squeeze Momentum formulaHow it is calculated.

x=close−(HH+LL)/2+SMA2squeeze whenBB⊂KC
STEP 1

Build both channels

Bollinger is the 20-bar average of the close plus and minus 2 population standard deviations. Keltner is that same average plus and minus 1.5 ATR, because the input 15 is divided by 10.

STEP 2

Mark the squeeze

If the Bollinger Bands are inside the Keltner channel, the dot is red. Otherwise it is green. The first bar has no momentum yet, so the column is 0.

STEP 3

Fit the histogram

Until 20 bars, the column is x, the close minus the average of the two centres. From the 20th bar on, the column is the end point of a line fitted to the last 20 values of x.

Squeeze Momentum settingsEvery setting, explained.

SettingDefaultRangeWhat it changes
Length202 to 5,000Bars in the average, the deviation, the ATR and the line fit.
Bollinger multiplier20 to 100Standard deviations around the average. The step is 0.1.
Keltner multiplier x10150 to 1,000Divided by 10 before use, so 15 means 1.5 ATR. The step is 1.
SourceCloseAny price, or volumeThe price inside x and the Bollinger average. High, low and true range still come from the bar.
Columns#00897b, #26a69a, #c62828, #ef5350FixedRising above zero, not rising above zero, falling at or below zero, otherwise.
DotsOff #26a69a, on #ef5350FixedGreen when the squeeze is off, red when Bollinger is inside Keltner.
Setting
Length
Default
20
Range
2 to 5,000
What it changes
Bars in the average, the deviation, the ATR and the line fit.
Setting
Bollinger multiplier
Default
2
Range
0 to 100
What it changes
Standard deviations around the average. The step is 0.1.
Setting
Keltner multiplier x10
Default
15
Range
0 to 1,000
What it changes
Divided by 10 before use, so 15 means 1.5 ATR. The step is 1.
Setting
Source
Default
Close
Range
Any price, or volume
What it changes
The price inside x and the Bollinger average. High, low and true range still come from the bar.
Setting
Columns
Default
#00897b, #26a69a, #c62828, #ef5350
Range
Fixed
What it changes
Rising above zero, not rising above zero, falling at or below zero, otherwise.
Setting
Dots
Default
Off #26a69a, on #ef5350
Range
Fixed
What it changes
Green when the squeeze is off, red when Bollinger is inside Keltner.
2010 squeeze changes in view
0.00070,20866,82563,44360,06164,803.7

Drag to see how the setting changes the lines and how many signals you get. Illustration on simulated data.

Squeeze Momentum strategiesUse it in 3 setups.

Trade the release, not the squeeze

Whenthe dot turns greenandmomentumis risingthenlook with it

Carter's idea is that a tight range often breaks. The dot says the range was tight. The column says which way the fitted momentum points.

Wait while the dot is red

Whilethe squeeze is onthendo not fade the column

A red dot is a compressed range. Fading a column during it fights the break that may follow.

Shrinking columns after a release

Ifcolumns shrink toward zerothentighten the stop

Momentum is fading. It is a reason to manage a trade, not a reversal by itself.

Test a rule in the Strategy TesterFree with 1 year of history. Past results do not guarantee future results.

Squeeze Momentum mistakesCommon mistakes.

Entering just because the squeeze is on

A red dot says the bands are inside the channel. It does not pick a direction.

Reading a tall column as a target

The column is a fitted distance from a recent centre. It has no upper bound and no promised move.

Treating the dot and the column as one signal

They answer different questions. One is volatility. The other is the direction of the fit.

Squeeze Momentum combinationsPair it with these.

Squeeze Momentum FAQQuestions traders ask.

What are the default Squeeze Momentum settings?

Length 20, Bollinger multiplier 2, Keltner multiplier x10 of 15, on the close. The 15 is divided by 10, so the channel is 1.5 ATR.

What is a squeeze?

Bollinger Bands sitting inside a Keltner channel. ChartLabs marks that with a red dot on the zero line, and a green dot when it is no longer true.

Why do the page pictures skip the dots?

The scenes draw the histogram, which is the part that changes shape. On a chart the dots are drawn as well.

What is the histogram?

It starts at 0. It is then the close minus a blend of the recent high-low centre and the average of the close, and from bar 20 it is the end of a line fitted to the last 20 of those values.

What do the four column colours mean?

Dark teal: above zero and rising. Pale teal: above zero and not rising. Dark red: at or below zero and falling. Pale red: at or below zero and not falling. A missing previous column counts as zero.

Is Squeeze Momentum leading or lagging?

The dot describes the range that just happened. The histogram is a fit to recent bars. Both look backward.

Does Squeeze Momentum repaint?

No. A closed bar keeps its column and its dot. The live bar moves until it closes.

What timeframe can I use?

Any. A short chart squeezes and releases more often.

Who created it?

John F. Carter described the squeeze in Mastering the Trade (McGraw-Hill, 2005), using Bollinger Bands and a Keltner channel. The histogram ChartLabs draws follows the 2014 LazyBear form, taken from a written note of that form, not from the script file.

Related indicatorsMore momentum tools.

All momentum indicators

Try Squeeze Momentum on a live chart.
Free. No download.

Works in your browser and on iPhone too.

Example market1h
Squeeze Momentum (20, 2, 15)